Table of Contents
Advertisement
Changing the initial setting of DVD (continued)
XL-MP110DVD
Setting
S-3D Sound
S3S
3
S S S
VIRTUAL
VIRTUAL
Audio Processing
DRC
Initialise
DIT/DA Output
Dolby Digital
DIT
96KHz LPCM
ENTER
Parental
PASSWORD
PARENTAL
LEVEL
31
Selectable parameters
(* indicates initial settings)
A 3D sound can be set when playing a DVD recorded in Dolby Digital (multi channel) only.
Off*
Low
Adjust to a suitable level.
Mid
High
Note: This function invalid when playing a Video CD/MP3/WMA/CD-DA disc.
Select a Virtual Surround System mode to get a virtual surround effects.
Off*
Low
Mid
High
MAX*
A Dynamic Range Control can be set when playing a DVD recorded in Dolby Digital (multi
STD
channel) only. For other disc (CD-DA, VCD & MP3/WMA), it is fixed at MAX.
MIN
MAX: Dynamic Range Control set to maximum
Off
STD: Dynamic Range Control set to standard
MIN: Dynamic Range Control set to minimum
Off:
Dynamic Range Control not setting
Yes*
The audio processing setting can be reset to a factory condition by pressing the ENTER
No
button.
Stream*
Select a digital output signal format
PCM
Stream: Select this when connecting the unit to a Dolby Digital/DTS surround amplifier.
PCM:
On*
You can output a digital signal when playing a DVD/VCD/MP3/WMA/CD-DA discs.
Off
The digital signal does not output.
96KHz*
If LPCM 48K is selected, PCM sound signals recorded at 96KHz are converted to 48KHz.
48KHz
____
Set a 4 digit password to enter parental setting mode.
Set or change a parental setting level.
Off*
1
. .
.
8
Description
Select this to output in PCM format.
Advertisement
Table of Contents
