Speaker Connection - Sharp XL-MP110DVD Operation Manual

Dvd micro system

Hide thumbs

Table Of Contents

Table of Contents

System connections (continued)

XL-MP110DVD

Aerial connection

Supplied FM aerial:

Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM

aerial wire in the direction where the strongest signal can be received.

Supplied AM loop aerial:

Connect the AM loop aerial to the AM LOOP socket. Position the AM loop

aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach

it to a stand or a wall with screws (not supplied).

Note:

Placing the aerial on the unit or near the AC power lead may cause noise

pickup. Place the aerial away from the unit for better reception.

Installing the AM loop aerial:

< Assembling >

External FM aerial:

Use an external FM aerial if you require better reception. Consult your dealer.

ANTENNA

LOOP

GND

75 OHMS

75 ohms

Coaxial

Cable

Note:

When an external FM aerial is used, disconnect the supplied FM aerial wire.

XL-MP110DVD(EN)10-16

Connect the black wire to the minus (-) terminal, and the red wire to the plus (+)

terminal.

Caution:

I Use speakers with an impedance of 6 ohms or more, as lower impedance

I Do not mistake the right and the left channels. The

I Do not let the bare speaker wires touch each

I Do not allow any objects to fall into or to be placed

I Do not stand or sit on the speakers. You may be

< Attaching to the wall >

Connect the speaker light-up wires to the SPEAKERS LIGHT-UP socket for

speaker illumination. To turn off the speaker light-up feature, press the

MEMORY/DIMMER button on the remote control for 2 seconds or more.

Screws (not supplied)

Wall

External

Note:

FM aerial

Placing the RIGHT speaker light-up wire to the RIGHT socket and LEFT speaker

light-up wire to the LEFT socket.

Make sure nothing comes into contact with the speaker

diaphragms when you remove the speaker grilles.