Using The Remote Control As The Pc Mouse - Sharp PG-M10SE Operation Manual

Using the Remote Control as the PC Mouse

The remote control of this unit can be used as the PC mouse (wireless mouse function) by connecting the MOUSE terminal of
this unit and the PC.
Remote control mouse functions
• The cursor key on the remote control operates the computer mouse functions.
• If a computer running Windows is connected, the ENTER button on the remote
control operates as the computer mouse left click button and the R-CLICK/EXIT
button as the computer mouse right click button.
• If a Macintosh computer is connected, the ENTER and R-CLICK/EXIT buttons
operate in the same way as the computer mouse click button.
Connecting a PC and the MOUSE terminal of this unit
Before connecting a PC
• Before connecting, turn off the PC power. Turn off the power of this unit if it is on.
• When connection is completed, turn on the power of this unit and then start the PC.
USB Port Connection
Connect the supplied USB mouse control cable
directly to the USB port (universal serial bus) of the
personal computer, as shown in the diagram.
MOUSE terminal
IBM PS/2 Mouse Port Connection
Connect the supplied PS/2 mouse control cable to the
personal computer, as shown in the diagram.
• Depending on the personal computer, the mouse may not be recognized in some cases if not connected to the MOUSE terminal before the
personal computer power is turned on.
• In the case of some notebook and laptop type personal computers, it may not be possible to use the standard pointing device (track ball, etc.)
of the personal computer when connected to the MOUSE terminal. In such case, it will not be possible to use the pointing device until the
personal computer is rebooted, even if disconnected from the MOUSE terminal.
• Windows 95 does not support USB mouse driver software.
Personal computer
USB port
USB mouse control cable (accessory)
AUDIO MOUSE COMPUTER S-VIDEO VIDEO
PS/2 MOUSE
port
PS/2 mouse control cable (accessory)
MOUSE
MOUSE button
MENU
VIDEO
R-CLICK/EXIT
IBM PC/AT or
Macintosh
IBM PS/2 compatible
ON/OFF
COMPUTER
21