Sharp PG-D45X3D Setup Manual page 31

5 5
Click "Properties" on the "File"
menu.
6 6
Click the "Settings" tab, and then
click "ASCII Setup".
7 7
Select the check boxes next to
"Send line ends with line feeds",
"Echo typed characters locally",
and "Append line feeds to
incoming line ends", and click
"OK".
• The LAMPRESET Properties window
appears, click "OK".
8 8
If a user name and/or password is
set for the projector, enter the
user name and password.
9 9
Send the lamp reset command
"LPRE0001".
• This command can only be sent when the
projector is in standby mode.
• When "OK" is received, this indicates that the
lamp was successfully reset.
10 10
Close HyperTerminal.
Resetting the Lamp Timer of the Projector via LAN
-31