Sharp PG-D4010X Setup Manual page 33
Hide thumbs
Also See for PG-D4010X:
- Operation manual (69 pages) ,
- Specifications (2 pages) ,
- Specification sheet (1 page)
Table of Contents
Advertisement
\ Take the following steps for checking the network settings for the computer.
1. Open a command prompt.
•
In the case of Windows
➔ "Command Prompt" in order.
•
In the case of Windows
➔ "Accessories" ➔ "Command Prompt" in order.
2. After launching the command prompt, enter the command "ipconfi g", and press the "Enter"
key.
Note
•
Communication may not be established even after carrying out the network settings
for the computer. In such cases, restart your computer.
C:\>ipconfi g
Note
•
Usage examples of ipconfi g
C:\>ipconfi g /?
C:\>ipconfi g
C:\>ipconfi g /all
3. To return to the Windows
2000: click "start" ➔ "Programs" ➔ "Accessories"
®
®
XP, Windows Vista
displays how to use "ipconfi g.exe".
displays the set IP address, subnet mask and default gateway.
displays all the setting information related to TCP/IP.
®
screen, enter "exit" and press the "Enter" key.
Troubleshooting
: click "start" ➔ "All Programs"
®
-33
Advertisement
Table of Contents
Need help?
Do you have a question about the PG-D4010X and is the answer not in the manual?