Turning On The Password And User's Logo - Epson POWERLITE 83V+ User Manual

3. When you see the message
and press .
Enter
4. Enter a 4-digit number using the numeric buttons on the remote
control, as shown.
The password will be displayed as
digit, a confirmation screen appears. Enter the password again.
You see the message
5. After you finish setting the password, press the
return to the Password Protect menu.
Make a note of the password and keep it in a safe place in case you
forget it.

Turning On the Password and User's Logo

1. Press the button on the remote control for about five
Freeze
seconds until you see the Password Protect menu.
2. To enable the password, select
. Select then press
Enter On
3. To enable your screen logo, select
. Select then press
Enter On
When this feature is on the logo appears whenever the projector is
turned on (if the
Startup Screen
menu; see page 58) and as the A/V Mute screen (if you selected
the as the
Logo Display Background
None of the User's Logo features can be changed when the User's
Logo Protect function is enabled.
4. Press to close the Password Protect menu.
Menu
If you lose the remote control, you will not be able to enter the
password, so keep the remote control in a safe place at all times.
You can attach the password protect sticker to the projector as an
additional theft deterrent.
Change the password?
. After you enter the last
****
.
Password accepted
Power On Protect
.
Esc
User's Logo Protect
.
Esc
is enabled in the Extended
in the Extended menu).
, select
Yes
Numeric
buttons
button to
Esc
and press
and press
Fine-tuning the Projector
65