Epson POWERLITE 83V+ User Manual page 79

Epson projector user manual
Hide thumbs Also See for POWERLITE 83V+:
Table of Contents

Advertisement

Power
Lamp
light
light
Green
Off
Flashing
Off
green
Orange
Off
Flashing
Off
orange
Red
Off
Red
Off
Red
Flashing
red
Orange
Flashing
orange
Red
Off
Red
Red
Temperature
light
Description
Off
The projector is operating normally.
Off
The projector is warming up. Wait for the image to appear.
Off
The projector is in standby or sleep mode. You can unplug
it or press the
Off
The projector is shutting down. Wait for the light to stop
flashing and remain orange before unplugging it.
Flashing
The projector is too hot. Make sure the temperature
orange
surrounding the projector does not exceed 95
and there is plenty of space around and under the projector
for ventilation. Clean the air filter and air vents, if
necessary. See page 70 for instructions.
Red
The projector has overheated and turned itself off. Let it
cool for about five minutes, then turn it back on. Make sure
there is plenty of space around and under the projector for
ventilation. If you are using the projector at an altitude
above 4921 ft (1500 m), turn on High Altitude Mode as the
Operation setting in the Extended menu; see page 58. Also
clean the air filter and air vents; see page 70. If it continues
to overheat, you may need to replace the air filter.
Off
The lamp is burned out, broken, or not installed correctly;
or the lamp cover is open. Close the cover or replace or
reseat the lamp, if necessary, as described on page 72.
Also clean the air filter and air vents; see page 70. If these
suggestions don't work, contact Epson.
Off
Replace the lamp with a new one as soon as possible; see
page 72 for instructions. If you continue to use the lamp,
there is a risk it may break.
Flashing red
There is a problem with the fan or a sensor. Clean the air
filter and air vents; see page 70.
If this does not solve the problem, turn the projector off
and unplug it. Contact Epson for help; see page 87.
Red
There is an internal error in the projector. Turn the projector
off and unplug it. Contact Epson for help; see page 87.
P
Power button to turn it on.
Solving Problems
°
°
F (35
C)
79

Advertisement

Table of Contents
loading

This manual is also suitable for:

V11h371020

Table of Contents