Sharp XE-A101 Instruction Manual page 17

Items
General Z report
GT memory
Conversion of preset prices of Dept./PLU
Exchange amount printing for total and
change
Exchange calculation method
Domestic currency symbol
Domestic currency decimal point position
Exchange currency symbol
Exchange currency decimal point position
Rounding of exchange currency
• The item marked with "-" remains the same as the previous data.
1
* : When you perform from EURO status 2, previous data remains unchanged.
2
* : When you perform from EURO status 1 or 2, "space" is set.
IMPORTANT
• After the execution of the procedure with "A=1", treat EURO as foreign currency using E. Set
the EURO conversion rate as the currency conversion rate for E.
• After the execution of the procedure with "A=2", treat EURO as domestic currency and national
currency as foreign currency using E. Set the EURO conversion rate as the currency conversion
rate for E.
• After the execution of the procedure with "A=3", treat EURO as domestic currency.
• As for the percent rate for % and HALO setting, the automatic conversion is not made. So, when
your domestic currency becomes EURO, you must change these settings so that they are based
on EURO currency.
• You can receive the amount of exchange (EURO or national currency) in cheque or credit. For
the programming, please refer to EURO programming on page 20.
• When "Exchange amount printing for total and change" is set to "Yes", you can display a change
in foreign currency by pressing E when the change is displayed in domestic currency.
Checking the current EURO status
You can check the EURO status currently set on the cash register. Set the mode switch to the
Z/PGM position, (if necessary, enter the secret code and press t) and perform the following
procedure. The current EURO status will be printed on the receipt or journal.
8:SS
A=1 A=2
(EURO status 1) (EURO status 2)
Issue Issue
- Clear
- Yes
Yes Yes
Division Multiplication
- [EURO]
- 2
[EURO] Previous domestic currency
symbol
2 Previous domestic currency
decimal point position
Round off Round off
EURO Migration Function
A=3
(EURO status 3)
Issue
1
Clear *
1
Yes *
No
Multiplication
[EURO]
2
2
-*
-
Round off
EURO status
15