Sharp DV-HR300X Operation Manual page 42

Timer Recording
42
9
Press ' / " or the Number
buttons to enter the stop time,
then press |.
• For example for 13:05 stop, press 1 3
0 5.
©
R E C . MOD E
F : F I N E S : S P L :
M : MA NU A L ( 1
R E C . ME D I A
H : H DD D : D V D
: S E L E C T
: E N T E R
10
Press ' / " to select "REC.
MODE", then use \ / | to select
the recording mode.
When "M:MANUAL (1~32)" is
selected:
• Select the recording mode with \ \ \ \ \ / | | | | | ,
then press SET/ENTER. (The
recording mode can be selected from
32 levels.)
11
Press ' / " to select "REC.
MEDIA", then use \ / | to select
the recording disc ("H:HDD" or
"D:DVD"), then press SET/
ENTER.
DA T E P R S T A R T S
2 5 / 1 2W 8 1 2 : 0 5
- - / - - - - - : - -
- - / - - - - - : - -
- - / - - - - - : - -
2 / 4
E R A S E : C A N C E L
: S E L E C T
: E N T E R
• If any more timer recordings are to be
set, repeat step 4 to 11 .
12
When you have completed enter-
ing the timer settings, press
START MENU or EXIT to exit
from the "START MENU" screen.
13
(When you select "D:DVD" in step
11 , ensure the recordable DVD-
RW/R is inserted into the Re-
corder) Press TIMER ON/OFF to
place the Recorder in TIMER
STANDBY mode.
L P E : E P
3 2 ) © 1 6
: CH A NGE
: R E T URN
• Data is still written to the disc after first
timer recording is stopped, the first part of
the next programme may not be recorded.
• During recording, press REC STOP to
cancel the recording. If there are further
recordings to be made, the Recorder will
not return to TIMER STANDBY mode.
• When you set a DVD as recording media,
timer recording will not start during disc
playback. If "ALTERNATE RECORDING" is
set to "YES", the programme will be timer
recorded to HDD.
• Timer recording will not start during dubbing.
• Manual recording and editing cannot be
performed during timer standby.
1 / 4
T OP
1 3 : 0 5 S D
- : - - - -
- : - - - -
- : - - - -
: R E T URN
• The TIMER indicator on the front of
the Recorder lights up.
OPERATE
• The channel cannot be changed
during TIMER STANDBY mode. To
change the channel, set TIMER
STANDBY to off.