Picture Adjustment; Function Timer Picture; System Normal; The Tv Set - Sharp 14R2DC Operation Manual

Picture Adjustment

Adjusting the Picture
TV/VIDEO
1
2 3
4
5 6
7
8 9
0
CH
CH
FUNCTION TIMER PICTURE
SYSTEM NORMAL
TV
(TV set)
!,@ #
I PICTURE menu screen
The following table lists the adjustment items shown in the PICTURE menu screen and how they change as
you press the VOLUME UP ( ) or DOWN ( ) button.
Selected Item
CONTRAST
COLOUR
BRIGHTNESS
TINT
SHARPNESS
• TINT can only be selected and adjusted when receiving NTSC broadcasts. (AV only)
• If approximately 6 seconds pass without a button being pressed, the mode setting is automatically
terminated and the TV set returns to normal mode.
!
Press the PICTURE button to
enter Picture Adjustment mode.
@
Each time you press the PICTURE
button, the mode changes as
shown on the right.
#
Adjust using the VOLUME UP
( ) or DOWN ( ) button.
TINT is displayed only for NTSC
and is not displayed for PAL or
#
SECAM.
!,@
• When the NORMAL button is
pressed while a PICTURE
selection is displayed on the
screen, only the selected mode
on the screen is reset to the
standard (factory setting)
position.
• When the NORMAL button is
pressed during NORMAL-MODE,
all PICTURE selections are reset
to the standard (factory setting)
positions.
Press the ( ) button
To decrease
contrast
For less colour
intensity
For less
brightness
To move tint
toward purple
For less
sharpness
(Example)
Press the
NORMAL button
Press the ( ) button
To increase
contrast
For more colour
intensity
For more
brightness
To move tint toward
green
For more
sharpness
13