Picture Adjustment - Sharp 14D2-SS Operation Manual

Picture Adjustment

Adjusting the Picture
TV/VIDEO
1 2 3
4 5 6
7 8 9
0
CH
CH
FUNCTION TIMER PICTURE
SYSTEM NORMAL
TV
(TV set)
!,@
H PICTURE menu screen
The following table lists the adjustment items shown in the PICTURE menu screen and how they
change as you press the VOLUME UP ( ) or DOWN ( ) button.
Selected item
CONTRAST
COLOUR
BRIGHTNESS
TINT
SHARPNESS
• TINT can only be selected and adjusted when receiving NTSC broadcasts. (AV only)
• If approximately 6 seconds pass without a button being pressed, the mode setting is automatically terminated
and the TV set returns to normal mode.
! Press the PICTURE button to
enter Picture Adjustment
mode.
@ Each time you press the
PICTURE button, the mode
changes as shown on the right.
# Press the VOLUME UP ( ) or
#
DOWN ( ) button.
TINT is displayed only for NTSC and
is not displayed for PAL or SECAM.
!,@
• When the NORMAL button is
pressed while a PICTURE
selection is displayed on the
screen, only the selected mode
on the screen is reset to the
standard (factory setting)
position.
• When the NORMAL button is
pressed during NORMAL-
MODE, all PICTURE
selections are reset to the
standard (factory setting)
positions.
#
Press the ( ) button
To decrease
contrast
For less colour
intensity
For less
brightness
To move tint
toward purple
For less
sharpness
(Example)
Press the
NORMAL button
Press the ( ) button
To increase
contrast
For more colour
intensity
For more
brightness
To move tint toward
green
For more
sharpness
‰ 12