Timers; Reminder - Sharp 14D2-SS Operation Manual

Timers

Reminder:

This function lets you know when a preset length of time has passed by displaying a
" " mark on the TV set. This is useful for timer cooking while you watch TV.
1
4
7
@
CH
CH
FUNCTION TIMER
!,#
SYSTEM NORMAL
TV
• To cancel the Reminder, press the NORMAL button during the Reminder mode.
• The minute setting of the timer is in 10-minute units.
• The Reminder is cancelled if the
• If approximately 6 seconds pass without a button being pressed, the mode setting is automatically terminated
and the TV set returns to normal mode.
‰ 13
H Setting the Reminder
! Press the TIMER button and
TV/VIDEO
the " " mark appears.
2 3
5 6
8 9
0
@ Press the VOLUME UP ( ) or
DOWN ( ) button to set the
time. (Maximum time that can
be preset is 12 hours and 50
minutes.) In this state, the
PICTURE
Timer starts to count down.
# When you have finished setting
the time, press the TIMER
button 3 times. The on-screen
display disappears.
H Action of the Reminder
5 minutes before the preset length
of time has passed, the remaining
time is displayed on the screen for
10 seconds.
When the preset length of time (in
the above example 3 hours and 30
minutes) has passed, the " " mark
turns red.
The Reminder function also works
when the TV set is in Standby mode.
Power is automatically turned on 5
minutes before the preset length of
time has passed. After completion of
above steps, the TV set returns to
Standby mode automatically.
(If you press any key before the TV
set returns to Standby mode, the
TV set remains on and does not
return to Standby mode.)
POWER switch on the TV set is turned off or if the power is otherwise cut off.
(Example)
Flashing
Turns
red for
1 minute
Flashing