Warning Indicators - Sharp ViewcamZ VL-Z3S Operation Manual

Operation References

Warning Indicators

If a warning indicator appears on the screen, follow the specified instructions.
Displayed for the
first 3 seconds
I NSE R T
A C AS S E T T E .
E J E C T THE
CAS SE T T E .
CAS S E T T E NOT
RE CORDA B L E.
T HE T A P E
E NDS SOON.
CHANGE T HE
CAS SE T T E .
BAT T ERY I S
TOO LOW.
DEW
L AMP
U S B
4
Displayed after
3 seconds
There is no video cassette in the camcorder.
Insert a cassette (see page 10).
The video cassette is defective and should be
E J E C T THE
removed (see page 10).
CAS SE T T E .
The erasure protect tab on the video cassette
PRO T EC T. TAB
has been slid to the record-protect position,
preventing recording (see page 92).
T APE END
T APE END
The battery is almost depleted. Replace it with
a fully charged battery pack (see pages 6, 7).
Dew has formed inside the camcorder. Wait a
few hours for the dew to dry away (see page vii).
DEW
About 10 seconds after this warning appears,
the camcorder automatically turns off.
The video heads are clogged and should be
cleaned (see page viii).
The fluorescent lamp behind the LCD monitor is
L AMP close to the end of its service life. Call your local
authorized Sharp dealer to have it replaced.
The battery is almost depleted when the
camcorder transfers data through the USB
cable. Use the AC adapter or fully charged
U S B
battery pack as the power source (see pages
6–9, 84).
Description of warning
The tape is about to end. Prepare a new
cassette.
The tape has reached the end. Replace it with a
new cassette (see page 10).