Recording From An External Source - Sharp ViewcamZ VL-Z3S Operation Manual

Advanced Features
Playback
Recording from an
External Source
Available mode:
Tape Playback
You can use this camcorder to record or
edit videos from another source, such as a
VCR or TV.
Preparation
Connect the camcorder to the source
equipment with the supplied audio/video/S-
video cable, as shown.
Playback
(VCR or TV)
VIDEO L-AUDIO-R
(MONO)
S-VIDEO
AV-OUT
Audio/video/S-video cable (supplied)
To AV
terminal
:
The arrow shows the signal flow.
64
Black: To S-video output socket
Yellow: To video output jack
White: To audio output (L) jack
Red: To audio output (R) jack
Recording
Notes:
• See page 2 for how to open the terminal
cover.
• If the source equipment has only one audio
output jack, use the white plug for the audio
connection on the source equipment. (The
input audio will only be recorded on the left
channel of the tape.)
• Even if the source equipment has an S-video
output socket, connect both the yellow video
plug and S-video plug.
• If your TV or VCR has a 21-pin Euro-SCART
connector, use the RCA/21-pin Euro-SCART
conversion connector (QSOCZ0361CEZZ).
21-pin Euro-SCART on TV or VCR
RCA/21-pin Euro-SCART
0
conversion connector
(QSOCZ0361CEZZ)
VIDEO AUDIO AUDIO
(L/MONO) (R)
Audio R
Video
Audio L