Disconnecting The Usb Cable - Sharp ViewcamZ VL-Z3S Operation Manual

Digital Still Camera Features
Playback
Image Folders and File
Names
Double-click the My Computer icon on the
PC and find a new drive called "Removable
Disk (F:)" (or other drive letter, depending
on your PC configuration). Still images
recorded using the camcorder are stored in
files and on a card as shown below.
DCIM Folder of still image files
• • • • • •
100SHARP
DVC00001.JPG
DVC00002.JPG
Note:
• If you copy any data incompatible with this
camcorder to the card, the camcorder will not
be able to recognize it.
Caution on transferring data
While transferring data, the transfer
indicator moves. Do not execute the
operations below.

• Disconnecting the USB cable

• Switching the power on/off
• Turning off the PC or setting it to Standby
• Removing the card
Transfer indicator
U S B
T R A N SM I T T I N G
Note:
• In case of data transfer error, disconnect the
USB cable, then connect it again, or set the
Power switch to OFF, then set it to w again.
84
Disconnecting the USB
cable
Windows Me/2000/XP
1
2
3
Sub-folder of still
images
Serial number
Windows 98
(100 to 999)
1
Still
image
2
Close Explorer or any open applica-
tions.
Click the "Safely Remove Hardware"
(or "Unplug or Eject Hardware") icon
that appears on the task bar, and
choose an applicable hard drive to
stop.
After the message "Safe To Remove
Hardware" appears, disconnect the
USB cable.
Note:
• See Windows Help for the procedure
of disconnecting USB cable in detail.
Close Explorer or any open applica-
tions.
When data is not being transferred
(the indicator on LCD display stays
still), right-click on the disk drive icon,
which appears on explorer window, to
eject the disk. After that, disconnect
the USB cable.