Using The Remote Control As A Wireless Mouse; Replacing The Batteries; Using The Projector Security Features - Epson PowerLite 760c Manual

Epson PowerLite 750c/760c Projector
Using the Remote Control as a Wireless
Mouse
When you use the remote control as a wireless mouse, you can
control your computer or click through slide show-style
presentations (such as Microsoft
20 feet away. Make sure you have connected the USB mouse
cable between the projector and your computer.
Page up or
page down
Left-click or
double-click
Display the
pointer
To advance slides in a PowerPoint presentation in Slide
Show mode, press the
Page Up
remote control. Press the
back a slide.
To display the mouse pointer, press the
To move the pointer on the screen, aim the remote at the
screen and use the pointer button.
To click (or left-click), press the
To right-click, press the
To double-click, press the
To click and drag, press and hold the
the pointer button to move the pointer, then release the
button.
Enter

Replacing the Batteries

Caution:
When replacing batteries, take the following precautions:
Replace the batteries as soon as they run out. If a battery leaks,
wipe away battery fluid with a soft cloth. If fluid gets on your
hands, wash them immediately.
Do not expose batteries to heat or flame.
Dispose of used batteries according to local regulations.
Remove the batteries if you won't be using the projector for a
long time.
8 Epson PowerLite 750c/760c Projector
-
® ®
PowerPoint ) from up to
Move the pointer
Right-click
or button on the
Enter
or button to go
Page Down Esc
button.
Pointer
button.
Enter
button.
Esc
button twice.
Enter
button and use
Enter
Follow these steps to replace the AAA alkaline batteries:
1. Turn the remote control over.
2. Press down on the tab on the battery cover as you lift the
cover off.
3. Remove the old batteries, then insert the new ones as shown.
4. Replace the battery cover. (It should snap into place.)

Using the Projector Security Features

To prevent unauthorized use of the projector, you can do the
following:
Assign a password; this can be disabled for a set period if you
want to loan the projector to someone.
Create an identifying user logo that is displayed at startup
and/or when the
A/V Mute
User's Guide for instructions.)
Disable the projector's buttons; this is useful, for example, if
you're projecting in a classroom and you want to ensure that
no one touches the projector's buttons while you're using the
remote control. See page 10 for instructions.
8/05
button is pressed. (See the