Using The Remote Control (Not Supplied) - Sharp ViewcamZ VL-Z1E Operation Manual

Useful Features
Useful Features
Playback
Playback
Using the Remote
Control
(Not supplied)
The remote control (RRMCGA149WJSA) is
not supplied with this camcorder. Contact
the nearest SHARP service centre or your
dealer for purchasing as specified part.
Activating
• The example screens shown are for
Playback mode.
1
Press the DISPLAY button until the
mode screen appears.
2
Press l or m on the Operation
button to select "MENU", then press
the centre of the Operation button.
3
Press l or m to select "EXECUTE",
then press the centre of the Operation
button.
4
Press l or m to select Z, then
press the centre of the Operation
button.
5
Press l or m to select "REMOTE",
then press the centre of the Operation
button.
O T H E R S 1
D E F A U L T
R EMO T E
B E E P
R E T U RN
6
Press l or m to select "ON", then
press the centre of the Operation
button.
REMOT E
7
Press the DISPLAY button to turn off
the menu screen.
42
O N
O F F
ON
Operating
Aim the remote control at the remote sensor
of the camcorder, and press the control
buttons to operate.
SLOW button
TAPE REC START/STOP button
* CARD REC button
ZOOM (W/T) buttons
* Shift buttons
* CARD PLAY/MULTI button
VOLUME +/L buttons
Advance/reverse buttons
Notes:
• Be careful not to expose the remote sensor to
direct sunlight or strong interior lighting, as
this may prevent the remote control from
operating properly.
• Be sure that there are no obstacles between
the remote control and the remote sensor.
• The buttons with an asterisk mark (*) do not
work with this camcorder.
Remote sensor
PAUSE/STILL
button
STOP button
PLAY button
FF button
REW button
T/C (Time
Code) button
DATE button