Table of Contents
Advertisement
Customizing Projector Features
Use the settings in this section to adjust the image size and position, suppress on-screen text,
and select basic setup options.
Image Sizing
Before adjusting any of these settings, make sure you have already selected an appropriate
aspect ratio for the type of picture you're viewing (see page 26).
■ Output Scaling
Image > Advanced > Output Scaling
For component video formats, this setting lets you see the edges of the image that are not
normally visible in the picture (see page 63). Select
visible parts of the image.
For HDMI signals, select
reduced image if you see interference at the top or bottom of the screen for computer
images (displays digital video at standard size). Select
it includes both the hidden and visible parts of the picture (displays computer images at
full size).
■ Position
Image > Position
Use the arrow buttons to fine-tune the position of the image on the screen.
■ Zoom Caption
Image > Zoom Caption
Lets you adjust the shape and position of the image so that subtitles are visible (available
only if the aspect ratio has been set to Zoom). Use
of the image, and
■
Aspect
Image > Aspect
This setting lets you change the aspect ratio of your image, and works the same as
pressing the
Aspect
displays images at the standard size.
Normal
for normal operation. Select
Auto
to move the image up or down.
Zoom Position
button on the remote control. See page 26 for more information.
to view both the hidden and
Larger
to show a slightly
Smaller
to expand digital video so
Normal
to adjust the proportions
Vertical Size
Making Detailed Adjustments
43
Advertisement
Table of Contents
