Installing The Qtopia Desktop; The Qtopiatray Icon - Sharp Qtopia Desktop Operation Manual

• If you are using Windows 2000/XP and remove the device form the Docking
Station or turn the device off while it is placed on the Docking Station, a warning
dialog box will be displayed on the screen of your PC (depending on the settings
for Windows XP). In this case, close the warning dialog box.

Installing the Qtopia Desktop

Follow these steps to install Qtopia Desktop:
1.
Make sure that the USB drivers are installed on your PC.
2.
Close all applications on your PC. If you are using anti virus or firewall software,
close them (or disable their function).
3.
Insert the CD-ROM supplied into your CD-ROM drive.
4.
Open D:Index.htm (use your CD-ROM drive letter).
5.
Check the installation procedure and follow the on-screen instructions.
When the installation is complete and your PC is restarted, the qtopiatray icon
(or ) will appear on the Windows system tray (bottom right-hand corner of the
taskbar).
Notes for Windows NT 4.0 Workstation with SP6/2000 Professional/XP users:
This application does not support use by multiple users. It can only be used by the
installer. For example, if an administrator logs in to a PC and installs this application,
then only that administrator is able to use it. Therefore, when other users want to use
this application, they must log in to a PC (with authorization as an administrator) and
install it before use.

The qtopiatray icon

By right-clicking on the qtopiatray icon, the menu will be displayed. This menu allows
you to select the main operation.
BEFORE YOU BEGIN
3