Recording With Another Vcr - Sharp VL-E78E Operation Manual

Useful Features
Playback/Editing
Your VIEWCAM can be used as the playback source
deck for dubbing and editing a tape with another
VCR.
Connect the VIEWCAM to a VCR with the supplied
audio/video cable, as shown.
Playback
Set
the Power
switch to VCR.
w This VIEWCAM lets you monitor the source
programme on the built-in LCD monitor screen
without having to connect it to an external TV or
video monitor.
Recording with Another VCR
1
2
3
4
5
On the VIEWCAM, playback the tape to be
edited, and locate the beginning and end of
the sequence you wish to cut. Then rewind
the tape to the beginning of the portion that
you wish to keep.
Load a blank tape cassette into the
recording VCR.
Press the VIEWCAM's PLAY button 0)
and the VCR's REC (Record) button at the
same time.
Press the VCR's Pause/Still button to
pause recording when the source tape
reaches the beginning of the sequence to
be cut.
Press the VCR's Pause/Still (or REC)
button to resume recording when the
source tape reaches the end of the
sequence to be cut.
To stop dubbing
Press the Stop buttons on the VIEWCAM
(
n
)
and
the VCR.
Recording
[YGi
IL
Yellow: To VIDEO IN jack
White: To AUDIO IN (L) jack
Audio/video cable
(supplied accessory)
\?
JJ
l
Make sure that you press the Pause/Still button at
exactly the right moments in steps
4
and 5 above.
Otherwise, some of the transitions between edited
sequences may be slightly off.
l
The picture may be disturbed during video search
picture playback. This does not imply a defect in
the VIEWCAM.
25 H