Selecting The Color Mode; Zooming Your Image; Adjusting The Brightness - Epson PowerLite 62c Specification Sheet

Epson PowerLite 62c/82c Projector
❏ To manually adjust the keystone correction value, press
the or button on the projector to correct the
shape of the image. After correction, your image will be
slightly smaller.
You can also make keystone adjustments using the projector's
Settings menu.

Zooming Your Image

Follow these steps to zoom in on a portion of the image:
1. Press the button on the remote control. You see
E-Zoom
a crosshair indicating the center of the zoom-in area.
2. Use the pointer button to position the crosshair in the
area you want to enlarge.
3. Continue pressing the
E-Zoom
selected area.
4. While the image is enlarged, you can:
❏ Use the
pointer button to move around the screen.
❏ Press the
E-Zoom
5. When you're done, press the
to its original size.

Adjusting the Brightness

The brightness of an image depends on the source from which
you are projecting and the amount of light in the room. If the
image is too bright or not bright enough, there are two ways to
adjust it:
❏ Change the
Brightness
❏ Select
or as the
Low High
the Settings menu. Low brightness mode extends the life of
the lamp and decreases the fan noise.
8 Epson PowerLite 62c/82c Projector
-
button to enlarge the
button to zoom out.
button to return the image
Esc
setting in the Image menu.
setting in
Brightness Control

Selecting the Color Mode

You may want to adjust the color mode to optimize the color
and brightness for the type of image you're projecting and the
environment in which you're projecting it.
If you're projecting computer or RGB video images, the default
color mode is
Presentation
presentations in bright rooms.
The following table lists the color modes available.
Color mode Description
Photo Best for projecting still images with vivid color
in a bright room (computer input only).
Sports Best for watching TV in a bright room
(component, S-Video, or composite video input
only).
Presentation Use when you're projecting a presentation in a
bright room.
Theatre Use when projecting movies in a dark room.
Game Best for playing video games in a bright room.
sRGB Use when projecting computer images
conforming to the sRGB color standard.
Blackboard Use when you need to project against a green
blackboard.
To change the color mode, press the
the remote control until you see the mode you want. The
currently selected setting appears in the upper right corner of
the screen. You can also use the projector menu system to
change the color mode in the Image menu.
9/05
Color
Mode
button
, which is appropriate for
button on
Color Mode