Recording From An External Source; To Stop Recording - Sharp VL-E71E Operation Manual

Recording from
an External Source
You can use your VIEWCAM to record or edit
video
from another source, such
as a VCR, TV, or video
disc player.
Connect the VIEWCAM to the source equipment,
using the supplied audio/video cable, as shown.
1
Set the Power switch to VCR.
To AUDIO/VIDEO jack
3
2
Start sending audio/video signals from the
source equipment connected to the
VIEWCAM. Check the VIEWCAM's monitor
screen to see if the picture is being properly
received.
3
Press the REC START/ STOP button on
Set the Power
1
the VIEWCAM to start recording.
Press the STOP button (H) on the VIEWCAM.
Audio/vlaeo caole
(supplied accessory)
Yellow: To VIDEO OUT jack
White: To AUDIO OUT (L) jack
Playback
Ti
TV with monitor output
Video disc player
/
\
0 25
a.
-