Table of Contents
Advertisement
Listening to the sound
Check that:
The source device Bluetooth functionality is ON.
Pairing of this unit and the source device is completed.
Any device connected to the AUX IN socket is turned off.
1
Press the ON/STAND-BY button to turn the power on.
2
Start the Bluetooth connection from the Bluetooth stereo
audio source device.
3
Start playing on the Bluetooth stereo audio source
device.
Note:
If the source device has an extra bass function or equaliser
function, set them to off. If these functions are on, sound may be
distorted.
Notes:
You need to make the Bluetooth connection again if:
- The unit is not turned on.
- The source device is not turned on, or its Bluetooth functionality
is off or is in sleep mode.
If both the Bluetooth connected device and the one connected to
the AUX IN are played simultaneously, only the Bluetooth sound
can be heard.
To finish listening
Perform any of the followings.
- Terminate the Bluetooth connection on the audio source device.
Refer the operating manual supplied with the device.
- Turn off the Bluetooth stereo audio source device.
- Turn off this unit.
Note:
The volume of this unit may not be controlled as intended depending
on the device.
DK-V2
11
Advertisement
Table of Contents
