Table of Contents
Advertisement
1
2
3
4
To the DC IN 5V socket
Insert securely,
all the way in.
Rechargeable battery power
When the rechargeable battery is used for
the first time or when you want to use it af-
ter a long period of disuse, be sure to charge
it fully.
1
Open the battery cover.
Slide the battery cover as far as it will go
to the outside and then lift to open it.
If the battery cover is lifted without be-
ing slid all the way out, it may break.
* MT15H FOR SEEG(E01-E19)
2
Insert the rechargeable battery accord-
ing to the polarity marked on the bottom
of the unit.
3
Close the battery cover.
4
Plug the AC adaptor into the AC socket,
and then insert the plug on the AC adap-
tor lead into the DC IN 5V socket.
5
Press the CHARGE (VOLUME down)
button to begin charging.
"
will begin charging.
After about 4 hours have passed,
"
This indicates that the battery charg-
ing is about 90% compleate.
To charge the battery fully, continue
charging for about 2 more hours.
(In this case, you do not need to press
the CHARGE button. Even if the
CHARGE button is pressed, "
will not appear.)
5
Notes:
After charging has been completed, the
AC adaptor may be left connected.
(For example, when charging at night)
The battery will not be charged when the
power to the main unit is turned on.
Do not force open the battery cover too wide.
Do not use a rechargeable battery or an
AC 220-230V,
AC adaptor other than those specified
50/60 Hz
on page 39 (OPTIONAL ACCESSO-
RIES).
The charging time will vary, depending
on the condition of the battery.
When the battery is charged for the first
time or is charged after not being used
for a long period, the operating time may
be shorter than normal.The battery life
will recover with normal use i.e. charg-
ing and discharging.
To avoid shortening the service life of the
battery only recharge the battery after it
has been completely discharged.
E-5
6
" will appear, and the battery
" will go out.
1999.05.07, 8:59
"
Advertisement
Table of Contents
