Disabling Quick File Transfer Software; Changes In Icons; Exiting Quick File Transfer Software - Sharp PixLab Online Manual

Disabling Quick File Transfer Software

This can be set so that recorded data is not transferred to
your PC even when the
camera is pressed.
1
Right click on the Quick File Transfer Software icon,
align the pointer at "Disable" and click.
The Quick File Transfer Software icon changes as shown below.
Repeat the procedure starting at step 1 if you want to enable Quick
Note
File Transfer Software.
button on the digital still
12
CONTENTS
CONTENTS

Changes in Icons

Quick File Transfer Software indicates the current status
with four icons.
Standby
Verifying digital still camera

Exiting Quick File Transfer Software

1
Right click on the Quick File Transfer Software icon,
align the pointer at "Exit" and click.
PREVIOUS PAGE PREVIOUS PAGE
Transferring recorded data
Disabled