Auto Sync Adjustment; Checking The Input Signal - Sharp XV-Z201E Operation Manual

Adjusting the Computer and DVD/DTV Images

Auto Sync Adjustment

Used to automatically adjust a computer im-
age.
Select whether the image is to be synchro-
nized automatically when switching the sig-
nal with "ON" or "OFF".
Select "Auto Sync" in the "Fine Sync"
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Selected Item Description
Auto Sync adjustment will occur
when the projector is turned on or
(ON)
when the input signals are switched,
when connected to a computer.
Auto Sync adjustment is not
(OFF)
automatically performed.
Note
• When the optimum image cannot be
achieved with Auto Sync adjustment, use
manual adjustments. (See page 48.)
• The Auto Sync adjustment may take
some time to complete, depending on the
image of the computer connected to the
projector.
• "Auto Sync" cannot be used in the DIGI-
TAL INPUT mode.
• Auto Sync adjustment is also performed
by pressing AUTO SYNC on the remote control.

Checking the Input Signal

This function allows you to check the current
input signal information.
Select "Signal Info" in the "Fine Sync"
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Note
• 540P is displayed on the screen when
I
signal 1080 is inputted during DVI con-
nection.
-50
On-screen Display
AUTO SYNC button
On-screen Display