Picture Setting Function - Sharp XV-Z201E Operation Manual

Picture Setting
Function
This function stores all items set in "Picture".
Five settings can be stored separately in
"Memory 1" to "Memory 5". Each stored set-
ting is reassigned to each input mode (INPUT
1 to INPUT 4 and DIGITAL).
Even when the input mode or signal is
changed, you can easily select optimal set-
tings from the stored settings.
I Storing the Adjustment Values
for Each Memory Number
Select "Picture Setting" on the "Picture"
menu and the memory location where
you want to store the settings. Then
adjust the setting items on the "Picture"
menu.
➝For operating the menu screen, see
pages 38 to 41.
Description
Selected Item
Memory Settings of all items in "Picture" can be
1-5 stored for the respective input modes.
The stored settings can be selected in
any input modes.
Memory Besides "Memory 1" to "Memory 5",
OFF other settings on the "Picture" menu
can be stored for each input mode.
The settings stored in "Memory OFF"
cannot be applied when another input
mode is selected.
I Applying the Stored Settings
If you want to apply the stored settings
on the "Picture" menu, select "Picture
Setting" on the "Picture" menu and the
memory location where you have
stored the settings.
Note
• This function can be operated using the
on the projector or
control, as well as the OSD menu screen.
Each time or
memory number changes as shown be-
low.
Memory 1 Memory 2
Memory OFF Memory 5
on the remote
is pressed, the
Memory 3
Memory 4
On-screen Display
PICTURE SETTING button
PICTURE SETTING
button
-47