Specifications - Sharp XL-MP110E Operation Manual

Specifications

XL-MP110E
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
General
Power source AC 230 - 240 V, 50 Hz
Power 100 W
consumption
Dimensions Width: 185 mm (7-1/4")
Height: 260 mm (10-1/4")
Depth: 307 mm (12")
Weight 6.1 kg (13.4 lbs.)
Amplifier
Output power MPO: 182 W (91 W + 91 W) (10 % T.H.D.)
RMS: 100 W (50 W + 50 W) (10 % T.H.D.)
RMS: 76 W (38 W + 38 W) (0.9 % T.H.D.)
Output terminals Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
200 mV/10 k ohms at 70 Hz
Input terminals Video/Auxiliary (audio signal):
500 mV/47 k ohms
CD player
Type 5-disc multi-play compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter 1-bit D/A converter
36
Frequency 20 - 20,000 Hz
response
Dynamic range 90 dB (1 kHz)
Tuner
Frequency range FM: 87.50 - 108.00 MHz
AM: 522 - 1,620 kHz
Cassette deck
Frequency 50 - 14,000 Hz (normal tape)
response
Signal/noise ratio 50 dB (recording/playback)
Wow and flutter 0.3 % (WRMS)
Speaker
Type 2-way type speaker system
5 cm (2") tweeter
13 cm (5-1/8") woofer
Maximum input 100 W
power
Rated input power 50 W
Impedance 6 ohms
Dimensions Width: 185 mm (7-1/4")
Height: 260 mm (10-1/4")
Depth: 205 mm (8-1/16")
Weight 2.4 kg (5.3 lbs.)/each