General Control - Sharp XL-DV75H Operation Manual

General control

/
ON / ON /
STAND-BY STAND-BY
ON / ON /
STAND-BY STAND-BY
1
4
7
DIRECT DIRECT
TUNING TUNING
PRESET PRESET
SETUP SETUP
EQUALIZER EQUALIZER
EQUALIZER EQUALIZER
MEMORY MEMORY
TOP MENU TOP MENU
SUB TITLE SUB TITLE
/ DIGEST / DIGEST
AUDIO AUDIO
SLOW SLOW
ASPM / PTY ASPM / PTY
■ To turn the power on
Turn the power switch to ON position, this will
bring the set to stand-by mode.
Press the ON/STAND-BY button to turn the
power on.
After use:
Press the ON/STAND-BY button to enter the
power stand-by mode. At STAND-BY mode,
red indicator will light up.
Note:
When the power switch is turned OFF, the backup function
will protect the memorised function mode for a few hours.
■ Auto power off function
In the stop mode of DVD/CD operation, the main unit
enters the stand-by mode after 15 minutes of inactivity.
OPEN / CLOSE OPEN / CLOSE
2 3
VOLUME VOLUME
5 6
8 9
0 10 10
TUNING TUNING
PRESET PRESET
OSD OSD FUNCTION FUNCTION
X-BASS X-BASS
VOLUME VOLUME X-BASS X-BASS
MUTE MUTE
MENU/PBC MENU/PBC
ENTER ENTER
RETURN RETURN
MUTE MUTE
ZOOM ZOOM ANGLE ANGLE
STEP STEP RANDOM RANDOM
RDS RDS
DISP DISP A-B A-B
■ Volume auto set-in
●
If you turn off and on the main unit with volume set to
16 or higher, the volume will start at 16.
●
If you turn the unit off then on again with the volume
level set to less than 15, it will turn on again at the level
set.
■ Volume control
Main unit operation:
When the VOLUME control is turned clockwise, the
volume will increase. When it is turned anti-clockwise, the
volume will decrease.
Remote control operation:
Press the VOLUME (+ or –) button to increase or decrease
the volume.
■ Extra bass control (X-BASS)
When the X-BASS button is pressed, the unit will enter the
extra bass mode which emphasises the bass frequencies
and "X-BASS ON" will appear.
To cancel the extra bass mode, press the X-BASS button
again.
■ Muting
The volume is muted temporarily when pressing the MUTE
button on the remote control. Press again to restore the
volume.
* TV screen displays "MUTE" when press MUTE button.
■ Equaliser
When the EQUALIZER button on the remote control is
pressed, the current mode setting will be displayed. To
change to a different mode, press the EQUALIZER button
repeatedly until the desired sound mode appears.
15
01 ...
MIN 30 MAX
FLAT
ROCK
CLASSIC
POPS
JAZZ