Listening To The Radio - JVC KD-R711 Instructions Manual

Remote
Main unit
controller

Listening to the radio

~
] "FM" or "AM"
Manual search
[Hold]
When an FM stereo broadcast is
hard to receive
1
[Hold]
2
] <TUNER> ] <MONO> ]
<MONO ON>
Reception improves, but stereo effect
will be lost.
To restore the stereo effect, repeat the same
procedure to select <MONO OFF>.
EN02-11_KD-R711_003A_5.indd 7 EN02-11_KD-R711_003A_5.indd 7
Selects the sound mode.
• Enters tone level adjustment directly (
EQ/BASS-TRE on the main unit.
• Enters "Call Menu" screen or answers incoming call when the unit
— rings.
• Ends a call if pressed and held.
• Activates/deactivates TA Standby Reception.
— • Enters PTY Searching mode if pressed and held.
• Returns to the previous menu.
Power off : Checks the current clock time.
—
Power on : Changes the display information.
Ÿ
"ST" lights up when receiving an FM stereo broadcast
with sufficient signal strength.
"M" flashes, then press
the button repeatedly.
General operation
23) if pressed and held
Automatic presetting (FM)—
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
While listening to a station...
1
[Hold]
2
] <TUNER> ] <SSM> ]
<SSM 01 – 06> / <SSM 07 – 12> /
<SSM 13 – 18>
"SSM" flashes and local stations with
the strongest signals are searched and
stored automatically.
To preset another 6 stations, repeat the above
procedure by selecting one of the other 6 SSM
setting ranges.
ENGLISH 7
12/17/09 5:23:54 PM 12/17/09 5:23:54 PM