JVC KD-R711 Instructions Manual page 28

FM Radio Data System operations
• Network-Tracking Reception requires two
types of Radio Data System signals—PI
(Programme Identification) and AF
(Alternative Frequency) to work correctly.
• If a Traffic Announcement is received by
TA Standby Reception, the volume level
automatically changes to the preset level
(TA VOLUME) if the current level is lower than
the preset level.
• When Alternative Frequency Reception is
activated (with AF selected), Network-Tracking
Reception is also activated automatically.
Disc/USB operations
Caution for DualDisc playback
• The Non-DVD side of a "DualDisc" does not
comply with the "Compact Disc Digital Audio"
standard. Therefore, the use of Non-DVD side
of a DualDisc on this product may not be
recommended.
General
• This unit has been designed to reproduce
CDs/CD Texts, and CD-Rs (Recordable)/CD-
RWs (Rewritable) in audio CD (CD-DA), MP3
and WMA formats.
• If you change the source while listening to a
disc, playback stops. Next time you select "CD"
as the playback source, playback will start
from where it had been stopped previously.
• When a disc is inserted upside down, "PLEASE"
and "EJECT" appear alternately on the display.
Press 0 to eject the disc.
• If the ejected disc is not removed within
15 seconds, it is automatically inserted into
the loading slot again to protect it from dust.
Playback starts automatically.
28 ENGLISH
EN22-29_KD-R711_003A_5.indd 28 EN22-29_KD-R711_003A_5.indd 28
• MP3 and WMA "tracks" (words "file" and "track"
are used interchangeably) are recorded in
"folders."
• While fast-forwarding or reversing on an MP3
or WMA disc, you can only hear intermittent
sounds.
Playing a CD-R or CD-RW
• Use only "finalized" CD-Rs or CD-RWs.
• This unit can only play back files of the same
type as those detected first if a disc includes
both audio CD (CD-DA) files and MP3/WMA
files.
• This unit can play back multi-session discs;
however, unclosed sessions will be skipped
while playing.
• Some CD-Rs or CD-RWs may not play back on
this unit because of their disc characteristics,
or for the following reasons:
– Discs are dirty or scratched.
– Moisture condensation has occurred on the
lens inside the unit.
– The pickup lens inside the unit is dirty.
– The files on the CD-R/CD-RW are written
using the "Packet Write" method.
– There are improper recording conditions
(missing data, etc.) or media conditions
(stained, scratched, warped, etc.).
• CD-RWs may require a longer readout time
since the reflectance of CD-RWs is lower than
that of regular CDs.
• Do not use the following CD-Rs or CD-RWs:
– Discs with stickers, labels, or a protective seal
stuck to the surface.
– Discs on which labels can be directly printed
by an ink jet printer.
Using these discs under high temperature
or high humidity may cause malfunctions or
damage to the unit.
12/17/09 5:23:36 PM 12/17/09 5:23:36 PM