Ricoh Caplio RZ1 User Manual page 69

8.
Press the shutter release button.
A picture is taken every time the fixed interval elapses.
9.
To stop shooting, press the O
Interval Shooting settings are cleared when the power is turned off.
Note
• In step 5, press and hold either the ! or the " button to quickly raise or lower the setting
value for minute.
• If you use batteries for power, you may exhaust the batteries. Using the AC Adapter (sold
separately) is recommended.
• Even during Interval Shooting, if you press the shutter button, the camera will shoot as
usual. However, Interval Shooting Mode is unaffected. After shooting, once the time
specified in Interval Shooting elapses, the next shot is taken.
• Depending on Picture Quality Mode and Flash Mode settings, the shooting interval may
become longer than the time set.
• When Interval Shooting is on, even when Multi-Shot is set to [CONT] or [MCONT],
consecutive shooting is automatically switched off.
O button. O O
67