Installing the Software
This section explains how to install the necessary software, such as Caplio Utility, USB
Driver for connecting the camera to a PC, and QuickTime.
Exit all other applications before following the procedures below to install the software.
Note
• If you start up Windows and connect the camera to the PC before installing the software, the
[Add New Hardware Wizard] screen will be displayed. If this happens, click on [Cancel] and
proceed to install the software after Windows is up and running.
• This section explains the installation procedure by the standard installation method. Users who
are familiar with PCs and digital cameras may choose to specify the software they wish to install.
• For Windows 2000, users with administrator rights should login first before installing the
software.
1
Turn the PC on and start up Windows.
2
Insert the CD-ROM supplied with the camera in the CD-
ROM drive. The initial CD-ROM screen will be displayed.
3
Select [Caplio RR1 Software].
The installer will start up and the language selection screen will be displayed
after a short time.
6