Replacing The Thermal Module - Acer TravelMate P243-M Service Manual

Replacing the Thermal Module

+
IMPORTANT:
Apply approved thermal grease and ensure all heat pads are in position
before replacing module.
CAUTION:
!
Use caution when applying thermal grease. Thermal grease may cause
damage to the mainboard.
The following thermal grease types are approved for use:
Silmore GP50

Honeywell

Jet Motor 7762

The following thermal pads are approved for use:
Eapus XR-PE

1. Remove all traces of thermal grease from CPU using a lint-free cloth or cotton swab
and Isopropyl Alcohol, Acetone, or other approved cleaning agent.
2. Apply small amount of thermal grease to center of CPU.
NOTE:
NOTE:
Force used during installation of thermal module is sufficient to spread grease
evenly over CPU top.
3. Place the thermal module (C) on the mainboard
Figure 3-70. Thermal Module
3-60
A
4
B
1
A
3
(Figure 3-70).
2
Machine Maintenance Procedures
0
C