Table of Contents
Advertisement
Replacing the RTC Battery
1.
Push the RTC battery into the holder.
Replacing the Thermal Module
IMPORTANT: Ensure all heat pads are in place before replacing the Thermal Module.
The following thermal pads are approved for use:
Eapus XR-PE
•
1.
Remove all traces of thermal grease or pad adhesive from the CPU and thermal module using a lint-free
cloth or cotton swab and Isopropyl Alcohol, Acetone, or other approved cleaning agent.
2.
Place the thermal module on the main board.
112
Chapter 3
Advertisement
Table of Contents
