Print Images; View Photos; Photocapture Center ® Print Settings - Brother MFC-J615W Basic User's Manual

Chapter 9

Print Images

View Photos

You can preview your photos on the LCD
before you print them. If your photos are large
files there may be a delay before each photo
is displayed on the LCD.
a
Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
Press (PHOTO CAPTURE).
b
Press a or b to choose
View Photo(s).
Press OK.
c
Press d or c to choose your photo or
movie.
d
Enter the number of copies you want
using the dial pad.
e
Repeat step c and step d until you
have chosen all the photos.
Note
Press Clear to go back to the previous
level.
f
After you have chosen all the photos, do
one of the following:
Press OK and change the print

settings. (See PhotoCapture
®
Center print settings on page 48.)
 If you do not want to change any
settings, press Color Start to print.
48
PhotoCapture Center
9
print settings
9
You can change the print settings temporarily
for the next printing.
These settings are temporary, and the
machine returns to its default settings
3 minutes after printing, unless you have set
the Mode Timer to 2 minutes or less. (See
Mode Timer in chapter 1 in the Advanced
User's Guide.)
Note
You can save the print settings you use
most often by setting them as the default.
(See Setting your changes as the new
default in chapter 8 in the Advanced
User's Guide.)
Print Setting
Print Setting
1
0001
Print Quality
Paper Type
Paper Size
1 No. of prints
(For View Photo(s), Search by Date, Slide
Show)
You can see the total number of photos that will
be printed.
(For Print All Photos, Print Photos, Enhance
Photos, Trimming)
You can see the number of copies of each
photo that will be printed.
(For DPOF printing) This does not appear.
®
9
Print Press Start
Photo
Other Glossy
4"x 6"