Connecting To A Workstation (Only Available For The Emp-7300/7200) - Epson EMP-7300 Owner's Manual

Connecting to a Workstation
(only available for the EMP-7300/7200)
You can not use any kind of workstations. Before connecting,
make sure the type of your workstation. If you are not sure of
the type of workstation, consult your dealer or local
workstation company.
The following workstations are available:
• If your workstation output is 13W3, use a
13W3(male) HD D-Sub15(male) cable.
• If your workstation output is 5BNC, use a
5BNC(male) HD D-Sub15(male) cable
* You need to turn the Computer2/5BNC switch on the back of the projector to
5BNC.
Note: If your computer contains the workstation function, refer
the section of "Connecting to a Computer" to connect.
28 Installation
(Epson recommended, MS8158CA (1.8m) 6ft,
(Epson recommended, MS8102CA (1.8m) 6ft)
MS8128CA (0.9m) 3ft)