Epson EMP-720 User Manual page 55

Sub-menu
Color Adjusts the colour temperature
Adjustment RGB color for each input source.
• Color Temp.: Lets you adjust bright colours within a
• RGB
(This item cannot be selected if "sRGB" has been
selected as the "Color Mode" setting in the "Video"
menu.)
Rear Proj. Use when projecting images from behind a translucent
screen.
When set to "ON", the projected images are horizontally
reversed.
Ceiling Use when installing the projector to a ceiling. When set
to "ON", the projected images are horizontally and
vertically reversed.
Link21L Sets whether the "EMP Link21L " utility software is
being used or not.
After changing the setting, turn off the projector's power.
After the cool-down
on. The EMP Link21L software can then be used.
See "Utility Software" in the Safety Instructions/World–
Wide Warranty Terms.
Reset Resets all adjustment values for the "Advanced" menu
functions except for the "Language" setting to their
default settings.
• Press the [Enter] button to display the confirmation
screen, and select "Yes".
• Select "Reset All" to return all menu settings including
settings for the "Video" and "Audio" menus to their
default settings. (p.55)
Function
and intensity of each
range from reddish tinges to bluish tinges.
If the colour temperature is lower, colours
appear reddish and color tones appear
softer.
If the colour temperature is higher, colours
appear bluish and colour tones appear
sharper.
Press the [Enter] button and make the
adjustment in the colour adjustment sub-
menu that appears.
: Sets the colour intensity for each RGB
(red/green/blue) colour in the image.
Press the [Enter] button, select "R" (red),
"G" (green) or "B" (blue) and make the
adjustment in the colour adjustment sub-
menu that appears.
has finished, turn the power back
Default
Color
Temp.:
Depends on
connection
OFF
OFF
OFF
-
53