Epson EMP-720 User Manual page 53

Sub-menu
Auto Sets the function for automatically correcting keystone
Keystone distortion when the angle of the projector has been
adjusted to ON or OFF. This function is only enabled
when the "Rear Proj. " and "Ceiling" commands in the
"Advanced" menu are set to "OFF". If either "Rear Proj. "
or "Ceiling" is set to "ON", this menu cannot be selected.
No-Signal Sets the message status and background colour at times
Msg. such as when no image signal is being input.
When set to "OFF", the background colour becomes
black and no message is displayed.
• To change the user's logo, you need to record and set
your own logo. (p.80)
Prompt Sets whether the input signal name is displayed on the
screen or not when the input signal is changed.
Color Mode Sets whether the colour mode prompt is displayed on the
Prompt screen or not when the colour mode is changed.
A/V Mute Sets the screen status when the [A/V Mute] button on the
remote control is pressed.
• To change the user's logo, you need to record and set
your own logo.
Sleep Mode Sets the energy saving operation when no signal is being
input.
• When set to "ON", projection stops automatically and
then after the cool-down
projector changes to sleep mode if no operations are
carried out for 30 minutes while the "No-Signal."
message is being displayed. (The Power indicator lights
orange.)
• Projection starts again when the [Power] button on the
projector's control panel or the remote control is
pressed.
Reset Resets all adjustment values for the "Setting" menu
functions to their default settings.
• Press the [Enter] button to display the confirmation
screen, and select "Yes".
• Select "Reset All" to return all menu settings–including
settings for the "Video" and "Audio" menus–to their
default settings. (p.55)
Function
period is finished, the
Default
ON
Blue
ON
ON
Black
ON
-
51