Using The Remote Control - Epson EMP-5500 Owner's Manual

Using the Remote Control

pointer button
top
multi-purpose
button
To use the remote control, point it towards the remote
control receivers located at the front and back of the
projector.
To be able to use the remote control as a cordless mouse,
connect the mouse cable (for PS/2) to the projector and your
computer.
You can use the remote control up to 10 metres (33 feet)
from the projector.
Note: The projector may not respond to remote control
commands in these conditions: ambient light is too bright; a
certain type of fluorescent light is present; a strong light source
(such as direct sunlight) shines into the infrared receiver; or
other equipment emitting infrared energy is present (such as a
radiant room heater). Correct these conditions to use the remote
control or control the projector from a computer.
Note: If you use the other mouse except the PS/2 mouse, you need
to purchase the Link Set to connect.
Source Menu
Effects
3
AV/Mute
Resize Custom
Freeze Help
- Volume +
Power
Remote control
Focusing and Positioning the Screen Image
bottom
multi-purpose
button
29