Craftsman 247.298780 Owner's Manual page 8

J_
K,
L.
Secure ferrule in gear shift lever (as shown
in figure 10) with hair p_n cotter (_),
To assemble the handle adjustment lever,
hook handle ad]ustmen.t' t:od '(already on
handle) into lever, Hoot_ to the outside.
See figure 11,.
Place handle adjustment tevet in place on
handle and secure with he× sci'ew (F) and
f0cl{nut (M), See figure 1t. Do not over
ttgilten handle adjustment lever must
pivot freely,
FIGURE 10.
F GU.RE i1.
M., ThrOttl e Control [.ever,
NOTE -,
]_he throttle control may have four
holes in the lever bracket The holes
on the outside edge are to be used
for mounting on this unit., See figure
12.