Craftsman INCREDI.PULL 316.79204.0 Operator's Manual page 10

PROBLEM SOLUTION
Empty fuel tank
Old or improperly mixed fuel
Engine is flooded
Air filter is plugged
Improper idle speed
Old or improperly mixed fuel
Dirty air filter
Old or improperly mixed fuel
Fill fuel tank with properly mixed fuel
Drain fuel tank and add fresh fuel mixture
With choke lever in position 3, squeeze the trigger and pull the starter rope
Replace or clean the air filter
Adjust according to the Idle Speed Adjustments section.
Drain fuel tank and add fresh fuel mixture
Clean or replace the air filter
Drain fuel tank and add fresh fuel mixture
Cutting attachment bound with grass
Inner reel bound up
Line welded
Not enough line is exposed
Oil, cleaner or lubricant in cutting head
Stop the engine and clean cutting attachment
Replace the inner reel
Disassemble, remove the welded section and rewind
Push the bump head and pull out line until 4 inches (102 mm) of line is
outside of the cutting attachment
Clean and thoroughly dry the cutting head
ELP.
YOu,,_[ find the answer" and mo_'e on managemyhomeoCOm - £o_"£_'ee°
° Find thls andall y ourother p roduct m anuals onhne.
° Getanswers fromourteam ofhome experts.
o Geta personahzed m aintenance p lanfor yourhome.
a.. ome .rojec
snag,., heN,e
b.o,,gZhtto yo,, by Sea.s
10