Table of Contents
Advertisement
When the Indicators Provide No Help
Refer to each relevant item if the following situations arise but the indicators provide no help.
The image is not projected
G Nothing is displayed
Nothing is displayed
page 73
page 75
page 77
page 77
page 78
page 78
page 79
page 79
page 80
G
Is the lens cover still in place?
see page 31
G
Has the power been switched off and then on immediately?
The [Power] button will not operate after projection has been
finished (during the cooling down procedure). The [Power] button
will work again after the cooling down* process Projection lamp
cooling operations: the operation indicator is illuminated in orange
has been completed.
see page 35
G
Is the sleep mode set at ON?
When the sleep mode has been set at [ON], the lamp will be
automatically extinguished if no operations occur and no signals are
input for a period of thirty minutes.
see page 60
G
Did you press the [Power] button?
see page 32
G
Has the brightness of the image been correctly adjusted?
see page 57
G
Is the system in the [A/V Mute] mode?
see page 44
G
Is the input image completely black?
There are cases where input images will become completely black
owing to screen savers, etc.
G
Are image signals being input?
No message will be displayed if the [Menu] - [Setting] - [No Signal
Msg] parameter is set at OFF. Set this to black or blue to display the
message.
Refer to the relevant items when the message is displayed.
see page 74
When the Indicators Provide No Help - 73
Advertisement
Table of Contents
