Epson EMP 7800 Getting Started Manual page 6

For epson stylus pro edition 3800, 4800, 7800, 9800

Hide thumbs Also See for EMP 7800:

Note: If the Windows server has a firewall enabled, you may need to

enter a user name and password. Contact your network administrator for

assistance or see your Windows Help for more information.

14. Click

to add the printer.

Add

You see the ColorBurst RIP Print Server name in the printer list.

Tip: To rename the printer, highlight the name of the ColorBurst RIP, click

Show Info, type a new name, then click Apply Changes.

15. Close the Printer Setup Utility. You're ready to print to the ColorBurst

RIP.

Windows Clients Printing to a Windows RIP Server

ColorBurst supports Windows XP and 2000. Other versions of Windows

are not supported.

Note: Make sure the ColorBurst RIP is shared on the server.

1. Make sure the network is set up and the ColorBurst RIP is running.

2. Windows XP: Click

Hardware > Printers and Faxes

Windows 2000: Click

3. Double-click the

4. Make sure the

Start > Control Panel > Printers and Other

Start > Settings > Printers

icon, then click

Add Printer

Network printer

button is selected. Then click