Epson EMP 7800 Getting Started Manual page 3

For epson stylus pro edition 3800, 4800, 7800, 9800

Hide thumbs Also See for EMP 7800:

Once the RIP server is installed and set up, see the appropriate section to set

up client systems for printing:

■

"Mac OS X Clients Printing to a Mac OS X RIP Server" below

■

"Mac OS X Clients Printing to a Windows RIP Server" on page 3

■

"Windows Clients Printing to a Windows RIP Server" on page 5

■

"Windows Clients Printing to a Mac OS X RIP Server" on page 6

Note: For a reliable connection, make sure client computers are on the same

subnet as the ColorBurst RIP server computer.

Mac OS X Clients Printing to a Mac OS X RIP Server

These instructions are for Mac OS X 10.3.x through 10.4.x.

1. Make sure your computer is connected to the same network as the

ColorBurst RIP server computer.

2. Insert the ColorBurst RIP CD-ROM in the CD-ROM or DVD drive.

3. Double-click the CD-ROM icon, then double-click the

Client Installer

4. Enter your Mac OS X Admin password, then click

5. Follow the on-screen instructions to install the ColorBurst client

software.

6. When installation is complete, check the ColorBurst RIP server

computer to make sure ColorBurst RIP is running.

icon.

ColorBurst