Table of Contents
Advertisement
4
Using the Notebook PC
Power State Summary
STATE
"Stand by"
STR ("Stand by")
(Suspend-to-RAM)
STD ("Hibernate")
(Suspend-to-Disk)
Soft OFF
Thermal Power Control
There are three power control methods for controlling the Notebook PC's thermal state. These power
control cannot be configured by the user and should be known in case the Notebook PC should enter
these states. The following temperatures represent the chassis temperature (not CPU).
•
The fan turns ON for active cooling when the temperature reaches the safe upper limit.
•
The CPU decreases speed for passive cooling when the temperature exceeds the safe upper limit.
•
The system shut down for critical cooling when temperature exceeds the maximum safe upper
limit.
58
ENTRY EVENT
• "Stand by" through Windows Start button
• Timer as set though "Power Management" in
Windows Control Panel (higher priority)
• Hotkey (see "Colored Hotkeys" under "Special
Keyboard Functions" in the previous section)
• Hotkey (see "Colored Hotkeys" under "Special
Keyboard Functions" in the previous section)
• Power button (can be defined as STR or STD)
• "Shut down" through Windows Start button
EXIT EVENT
• Any device
• Battery low
• Signal from modem port
• Power button or any key
• Power button
• Power button
Advertisement
Table of Contents
