Table of Contents
Advertisement
4
Using the Notebook PC
Power Savings
In addition to reducing the CPU clock, this mode puts devices including the LCD backlight in their
lower active state. The Notebook PC enters "Stand by" mode (low priority) when the system remains
idle for a specified amount of time. The timeout can be set through Windows power management
(higher priority). To resume system operation, press any key.
Power State Summary
STATE
"Stand by"
STR ("Stand by")
(Suspend-to-RAM)
STD ("Hibernate")
(Suspend-to-Disk)
Soft OFF
Thermal Power Control
There are three power control methods for controlling the Notebook PC's thermal state. These power
control cannot be configured by the user and should be known in case the Notebook PC should enter
these states. The following temperatures represent the chassis temperature (not CPU).
• The fan turns ON for active cooling when the temperature reaches the safe upper limit.
• The CPU decreases speed for passive cooling when the temperature exceeds the safe upper limit.
• The system shut down for critical cooling when temperature exceeds the maximum safe upper limit.
56
ENTRY EVENT
• "Stand by" through Windows Start button,
• Timer as set though "Power Management"
in Windows Control Panel (higher priority)
• Hotkey [Fn][F1]
--
• Hotkey [Fn][F1]
--
• Power button (can be defined as STR or STD) • Power button
• "Shut down" through Windows Start button
EXIT EVENT
• Any device
• Battery low
• Signal from modem port
• Power button • Any key
• Power button
• Battery Extremely Low
Advertisement
Table of Contents
