Connecting To A Computer; Connecting The Rgb Video Cable - Epson ELPDC02 User Manual

Epson high resolution document imager user'sguide elpdc02

Hide thumbs Also See for ELPDC02:

Table of Contents

Setting Up the Document Camera

Connecting to a Computer

In addition to using the stage for your presentation material, you can

connect up to two devices that have RGB video output ports, such as a

laptop and desktop computer.

This is especially useful if your projector has only one input port. You

can connect the computers to the document camera's RGB input

ports as described below, and connect the document camera to the

projector's input port as shown on page 11. This way, you can use the

camera's control panel or remote control to switch easily between

picture sources. Follow the instructions on page 18 to switch between

the sources.

Before you start, make sure your document camera and computers are

turned off.

1. Connect one end of the RGB video cable to the document

camera's

RGB1

2. Connect the other end of the RGB video cable to your computer's

RGB video output (monitor) port.

3. Tighten the screws on the connectors.

Repeat the steps to connect a second computer.

port.

RGB2

Table of Contents