Programme Selector Dial - Zanussi TCS 674 E Installation And Instruction Manual

Table of Contents

Advertisement

11 Programme selector dial

The selector dial allows you to select the desired
programme or time.
Automatic drying (electronic programmes)
The appliance operates in these programmes by
means of dampness sensors. All you have to do
is to set the selector dial to the programme
required (A, B, C or D), according to the type of
laundry and the degree of drying required (see
programme table).
Time controlled drying
You can select a time up to 90 mins. to finish off
drying, if necessary, or to use your tumble dryer
independently of the electronic control system.
When selecting a short drying time, remember
that during the last 9 mins. of operation, the heat
is cut off in order to carry out a cooling phase.
To cancel a programme in operation, turn the
selector dial to "0".
When drying is completed, switch off the
appliance by turning the dial to "0" before
opening the door.
8
12 Mains-on light
This light lights up by selecting the programme or
time and goes out by turning the selector dial to
"0" or by opening the door.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents