Image Colours Are Not Right; Images Appear Dark - Epson Dreamio EMP-TW1000 U User Manual

Has the correct resolution been
selected?
Only when projecting
computer images
■

Image colours are not right

Are the image signal format
settings correct?
Are the cables connected
correctly?
Has the image contrast
been adjusted correctly?
Has color been adjusted
appropriately?
Have the colour intensity and
tint been adjusted correctly?
Only when projecting
images from a video
source
■

Images appear dark

Has the image brightness been
adjusted correctly?
Has the image contrast
been adjusted correctly?
Is the lamp due for
replacement?
Set the computer so that the signals that are output are compatible
with this projector.
"List of Supported Monitor Displays" p.49
Computer documentation
If a composite video or S-Video
If projection does not occur when the "Video Signal" menu
command is set to "Auto", select the signal format that matches the
signal source.
"Settings" - "Input Signal" - "Video Signal" p.34
If the signal source is connected to the [Component] or [D] input
port
If projection does not occur when the "Component" in the "Input
Signal" menu command is set to "Auto", set the signal format that
matches the signal that is being projected from the connected
equipment. "Settings" - "Input Signal" - "Component" p.34
Check that all of the cables required for projection are securely
connected. p.12
Use the "Contrast" menu command to adjust the color.
"Image" - "Contrast" p.30
Use the "Advanced" menu command to adjust the colour.
"Image" - "Advanced" p.30
Use the "Color Saturation" and "Tint" menu commands to adjust
the colour and tint.
"Image" - "Color Saturation", "Tint" p.30
Use the "Brightness" menu commands to make the adjustments.
"Image" - "Brightness" p.30
Use the "Contrast" menu command to adjust the color.
"Image" - "Contrast" p.30
When the lamp is nearly due for replacement, the images will
become darker and the colour quality will become poorer. When
this happens, the lamp should be replaced with a new one.
Problem Solving
is being input
p.46
41